Tuesday, February 23, 2016

LG G3: Hard Reset (Factory Reset)

Problem How to make a Factory Data Reset (Hard Reset) on LG G3 smartphone?

Solution 1 (Factory reset via menu )

Open Android Settings
Tap Backup & reset
Tap Factory data reset
Tap Reset phone
Tap Erase everything
Solution 2 (Hard reset via buttons )
There are THREE different options to make a hard reset via buttons. Only one is for your phone. You have to try out all to find out which is yours, because it depends on your exact Android version.

Option 1

Power off the device and wait 10 seconds
Press and hold the Volume Down button and the Power button

    When the LG logo is displayed release BOTH Buttons then immediately press and hold the Volume Down and Power buttons again.

    Release both buttons when the Factory data reset screen displays.
    From the Factory data reset screen, select Yes. Use volume keys to navigate.

Option 2

    Power off the device and wait 10 seconds
    Press and hold the Volume Down button and the Power button


    When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.

    Release both buttons when the Factory data reset screen displays.
    From the Factory data reset screen, select Yes. Use volume keys to navigate.

Option 3
    Power off the device and wait 10 seconds

    Press and hold the Volume Down button and the Power button
    When the LG logo is displayed release BOTH Buttons then immediately press and hold the Volume Down and Volume Up buttons.

    Release both buttons when the Factory data reset screen displays.
    From the Factory data reset screen, select Yes.

LG Optimus Vu F100L V29I Firmware Update

GIDE - How To Flash
F100L KDz ROM BY AzimBahar
Flashing Started
Its Not Error Wait Until Phone Restarted

How to Flash the LG Optimus Vu:
    Then download the firmware updating software KDZ_firmware_updater and extract it to a folder. Install msxml on your windows pc by double clicking it.
    Charge the phone to the maximum.
    Entry Download mode (Vol- & Power Until come on display Download) & Connect Phone To PC
    Disable Usb Modem Driver From Modem Tab (On Device manager )
    Open KDZ_FW_UPD.exe
    In the software window, select Type as 3GQCT
    Select PhoneMode as DIAG
    In the ‘KDZ file’ space, browse for the firmware you want to install. (In this case F100L40b_00.kdz)
    Click “Launch software update”
    The firmware flashing process is now underway. If all goes well, in 5-10 minutes the phone will be flashed with the new firmware.
    After booting up fully, detach the phone from the pC.

OCA repair thred

Hello to all,

i'm from Croatia and i do LOCA based glass only repar. My goal with this thread is to find some information about OCA based LCD repair.

Right now with LOCA repair and i repair Galaxy S1, S2, S3, S4, S5, Note 1 etc.

My step by step guide is:
- Disassemble the phone
- Heat up front of the screen
- Remove broken glass
- Clean the screen from old glue
- Remove AMOLED panel from midle housing
- Put AMOLED panel in alighment mold
- Put LOCA glue and cure it

This guide works with AMOLED type of screen's. I wanna do glass replacment on LCD screen type which have backlight or light box. The problem is that i need to remove backlight to stop LOCA glue to get in backlight. Problem is when i remove backligh i can easly broke LCD, i cant clean so good back of the LCD, and lightbox are extra cost and I cant find it for some model.
So i did some research and i found out about OCA tehnic.

So i need to know Which machine do i need to have for proper glass replacment.
I found out that i need:
- LCD dissasembly machine (which I have)
- OCA/polarizator remover
- Laminator machine for OCA/Polarizator
- Vacuum laminator machine for OCA/Polarizator
- Autoclave machine
- Laminator frame machine for iPhone

My bigest concer is that is it necessarily to have: Laminator for OCA and Vacuum Laminator machine. These one are the most expensive. Isn't just good enough after cleaning LCD/AMOLED panel to apply OCA sheat by hand with 3 inch roller, without Laminator and just put it in autoclave? Will the final resoult be without any bubbles?
I know that i need to have Autoclave and OCA/Polarizator remover.

lg f120l after update ime 0000 lgtool ime repair sucess but same

Flashing NVM: OK
Switching to normal mode…
Switching to normal mode: OK
Repair IMEI: Finish
IMEI: 359446-59-878791-1
IMEI successfully repaired
Receiving phone info
Getting phone info
Model: F120L
Platform: LG Qualcomm
Software Platform: Android
SDRAM Size: 2 GB
NAND Flash Size: 16 GB
CPU: APQ8060 + MDM9200
Firmware Released: Aug 02 2012 14:30:35
Firmware Compiled: Aug 02 2012 14:30:35
Firmware Version: SCAQSVZQD/M9600B-SCAQSVZD-3.6.2421
IMEI: 000000-00-000000-0
Connect mode: Normal
Info received
Disconnected
Connecting with F120L

In order to connect with phone you should do the following:
1. Enable Android Debug Mode
2. Reconnect USB cable
Connected
Receiving phone info
Getting phone info
Model: F120L
Platform: LG Qualcomm
Software Platform: Android
SDRAM Size: 2 GB
NAND Flash Size: 16 GB
CPU: APQ8060 + MDM9200
Firmware Released: Aug 02 2012 14:30:35
Firmware Compiled: Aug 02 2012 14:30:35
Firmware Version: SCAQSVZQD/M9600B-SCAQSVZD-3.6.2421
IMEI: 000000-00-000000-0
Connect mode: Normal
Info received
Repairing IMEI
Repair IMEI: Start
Preparing NVM…
Getting phone info…
Getting phone info: OK
Switching to NVM mode…
Switching to NVM mode: OK
Preparing NVM: OK
Patching NVM…
Patching NVM: OK
Flashing NVM…
Can’t flash nvm page
Flashing NVM: OK
Switching to normal mode…
Switching to normal mode: OK
Repair IMEI: Finish
IMEI: 359465-45-612313-4
IMEI successfully repaired
Receiving phone info
Getting phone info
Model: F120L
Platform: LG Qualcomm
Software Platform: Android
SDRAM Size: 2 GB
NAND Flash Size: 16 GB
CPU: APQ8060 + MDM9200
Firmware Released: Aug 02 2012 14:30:35
Firmware Compiled: Aug 02 2012 14:30:35
Firmware Version: SCAQSVZQD/M9600B-SCAQSVZD-3.6.2421
IMEI: 000000-00-000000-0
Connect mode: Normal
Info received

G920T read Cert Error(NV_Data Attached)

Operation: Read CERT
Selected model: SM-G920T
Software version: 22.3
Waiting ADB device… OK
Reading phone info…
Model: SM-G920T
Android version: 5.1.1
Product code: SM-G920TZDATMB
Phone version: G920TUVU2COF8
PDA version: G920TUVU2COF8
CSC version: G920TTMB2COF8
CSC country code: USA
CSC sales code: TMB
HW version: REV1.0
Phone S/N: R58G41KKSZB
Modem board: SHANNON333
RF cal date: 20150423
IMEI:
Checking Super user right… true
Reading nv data… OK
Checking magic…
Initialization AT RIL… OK
Sending request to server… OK
Waiting answer… OK
Security damaged or incorrect key
Done with Samsung Tool PRO v.22.3

How to Remotely Repair IMEI

Hey guys,

I am new here and I am not sure if I am posting in the correct Forum category. I searched everywhere and I am surprised this topic hasn’t been brought up.

I plan on buying a z3x box for IMEI repair services, but I noticed there are online services being offered to repair imei REMOTELY. The only thing a customer has to do is connect their phone to their computer and connect via a remote software like team viewer. I am puzzled to how this is possible without the customer not having a box connected.

Will someone tell me how can I offer IMEI repair remotely?

OT-970H not unlocked

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.4.7
Selected phone: OT-970H
DA: MTK_AllInOne_DA.bin
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now…
Detected : MediaTek PreLoader USB VCOM (Android) (COM17)
Phone detected…Please wait
Sending DA agent, please wait…
BBCHIP MT6575_S01
EMMC: (29Gb+4096Mb) SAMSUNG 0x4e355530304d
EMMC FW VERSION: 02:00:00:00:00:00:00:00
BOOT STYLE : EMMC BOOT
Detecting high speed port, wait……
If driver not installed, install high speed port driver.
Detected : MediaTek DA USB VCOM Port (COM20)
OTP IMEI : 862707021600553
MODEL FW: 970H-2BMSRU1я
Reading security, wait…
SECRO FW : XHI0HP01
NCK : 02537575 : Locked
NSCK : 18851657 : Unlocked
SPCK : 19902418 : Unlocked
SIM : 19666153 : Unlocked
If lock counter is 0, make "RESET PHONE" from exe.
Simlock backup already exists, skip save.
Wait untill phone will start charging.
All done.
after direct unlock show network locked, reset phone same problem! not ask nck :confused: